Datasheet - CI23E-125

Dimensions

${#text_magnify#}$

Product range

Ci insulated enclosures

Basic function

Basic enclosures

Product function

Individual enclosures

Single unit/Complete unit

Single unit

Degree of Protection

IP65

Description

With metric knockouts in all sides of the enclosure
Include fixing straps for wall mounting
Sealable cover fasteners
Full-area knockouts in the sides
can be converted to a distribution board enclosure

Colour

RAL 7032, pebble grey (base)
transparent, opaque (cover)

Width

187.5

Height

250

Depth

150

Mounting depth with mounting plate

125

Mounting depth for mounting rail 7.5 mm height

117.5

Mounting depth for mounting rail 15 mm height

110

Enclosure depth

Legend for the graphic

Dimensions from top:
Mounting depth with mounting plate
Mounting depth for mounting rail 7.5 mm height
Mounting depth for mounting rail 15 mm height
Enclosure depth

Enclosure depth

${#text_magnify#}$

Type cover

Transparent

Model base

knockout

For use with

PKZM0-…/S(E)00
+NHI or NHI…S
+NHI-E
+U or A (undervoltage or shunt release)
+R(H)
+L-PKZ0 (2 off)

Notes

${#text_magnify#}$

1 x M32/20

6 x M20

2 x M16

${#text_magnify#}$

2 x M32/20

4 x M25/16

4 x M20

4 x M16

General
Standards		IEC/EN 60529 EN 50262 DIN 43656 DIN 43660 EN 60439-4 for CI...X individual enclosures with combined distribution boards from Ci enclosures up to 680 A. Can thus be used for socket combinations and as component for construction site distribution boards.
Climatic proofing		Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature	°C	-40 - +80
Degree of Protection		IP65
Power loss
Max. radiated heat dissipation with separate mounting, ambient air temperature +20 °C	W	33
Max. radiated heat dissipation in distribution board combination to VDE 0660 Part 500	W	25
Notes		When calculating the heat dissipation, the quadratic relationship of current with the rated diversity factor a must be considered. P_v = I₂ x R P_v’ = P_v x a² If no data is available concerning the load relationships of the individual circuits, the rated diversity factor is selected conform to VDE 0660 Part 500.
additional technical data for UL-/CSA- approved devices		see UL-report File No. E54120
Operating and ambient conditions to VDE 0660 Part 500
Colour
Base		RAL 7032, pebble grey
Housing body		Transparent, colourless or RAL 7032, pebble grey
Material characteristics
Material		glass-fibre reinforced polycarbonate (base) non-reinforced polycarbonate (cover) Halogen free
Surface treatment		Resistant to corrosion
Colour		RAL 7032, pebble grey (base) transparent, opaque (cover)
Colour
Base		RAL 7032, pebble grey
Housing body		Transparent, colourless or RAL 7032, pebble grey
Material properties
Electrical
Track resistance		KB160, KC175 (base, to IEC 60112) KB100, KC200 (cover, to IEC 60112)
Surface resistance to IEC 60093	Ω x 10¹³	1
Dielectric strength to IEC 60243-1	kV/mm	30
Thermal
Temperature resistant		-40 °C - 120 °C (enclosure) 85 °C (enclosure bolt) 80 °C (gasket)
Mechanical
Impact resistance		IK10 according to EN 50102
Loading capacity	kg/m²	5
Chemical resistance
Chemical resistant		Resistant against: Acids < 10 %, mineral oil, alcohol, gasoline, greases, salt solutions Partly resistant to: Acids > 10 % Not resistant to: alkalis, benzene
Atmospheric
Saline spray		IEC 60068-2-11
UV resistance		Beneath protective shield
Water consumption to DIN EN ISO 62	%	0.29
Flammability characteristics
Flammability classification according to UL94		V1 (base) V2 (cover)

Technical data for design verification
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees, calculated as per IEC 60890
Individual enclosure for wall mounting	P_V	CO	12
Starting enclosure for wall mounting	P_V	CO	11
Middle enclosure for wall mounting	P_V	CO	10
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees, calculated as per IEC 60890
Individual enclosure for wall mounting	P_V	CO	24
Starting enclosure for wall mounting	P_V	CO	22
Middle enclosure for wall mounting	P_V	CO	20
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance			Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures			Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat			Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects			Lower part: 960 °C / cover: 850 °C; meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation			Not relevant to indoor installations.
10.2.5 Lifting			5 kg per enclosure with support frame and lifting aid met; assembled and secured as per the latest applicable instruction leaflet.
10.2.6 Mechanical impact			IK10
10.2.7 Inscriptions			Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES			IP65
10.4 Clearances and creepage distances			Is the panel builder's responsibility.
10.5 Protection against electric shock			Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components			Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections			Is the panel builder's responsibility.
10.8 Connections for external conductors			Is the panel builder's responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strength			U_i = 1000 V AC
10.9.3 Impulse withstand voltage			8 kV
10.9.4 Testing of enclosures made of insulating material			Meets the product standard's requirements.
10.10 Temperature rise			The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating			Is the panel builder's responsibility.
10.12 Electromagnetic compatibility			Is the panel builder's responsibility.
10.13 Mechanical function			Meets the product standard's requirements.

${#text_magnify#}$
${#text_magnify#}$
${#text_magnify#}$
CI23E

	Manufacturer's Declaration CI-RoHS
	Declaration of conformity
	Motor starters and "Special Purpose Ratings" for the North American market
	Busbar Component Adapters for modern Industrial control panels

	Insulated enclosure, +knockouts, HxWxD=250x187.5x150mm
	Part no.	CI23E-125
	Catalog No.	019570

	EL-Nummer (Norway)	4132075