Datasheet - CI43X-150-NA

Product range		Insulated enclosures Ci for North America
Basic function		Basic enclosures
Product function		Individual enclosure for North America Individual enclosures with covers
Single unit/Complete unit		Stand-alone device
Degree of Protection		IP65
Description		Fixing straps for wall fixing Sealable cover fasteners
Dimensions
Width	mm	375
Height	mm	250
Depth	mm	175
Mounting depth:	mm	150
Type cover		Transparent
Model base		RAL 7032, smooth sides

General
Standards		IEC/EN 60529 EN 50262 DIN 43656 DIN 43660 EN 60439-4 for CI...X individual enclosures with combined distribution boards from Ci enclosures up to 680 A. Can thus be used for socket combinations and as component for construction site distribution boards.
Climatic proofing		Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature	°C	-40 - +80
Degree of Protection		IP65
Operating and ambient conditions to VDE 0660 Part 500
Colour
Base		RAL 7032, pebble grey
Housing body		Transparent, colorless
Surface finish		RAL 7032 (base)
Material characteristics
Surface treatment		Resistant to corrosion
Surface finish		RAL 7032 (base)
Colour
Base		RAL 7032, pebble grey
Housing body		Transparent, colorless
Material properties
Electrical
Track resistance		KB160, KC175 (base, to IEC 60112) KB100, KC200 (cover, to IEC 60112)
Surface resistance to IEC 60093	Ω x 10¹³	1
Dielectric strength to IEC 60243-1	kV/mm	30
Mechanical
Impact resistance		please require
Atmospheric
Saline spray		IEC 60068-2-11
UV resistance		Beneath protective shield
Water consumption to DIN EN ISO 62	%	0.29

Technical data for design verification
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees, calculated as per IEC 60890
Individual enclosure for wall mounting	P_V	CO	22
Starting enclosure for wall mounting	P_V	CO	21
Middle enclosure for wall mounting	P_V	CO	20
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees, calculated as per IEC 60890
Individual enclosure for wall mounting	P_V	CO	44
Starting enclosure for wall mounting	P_V	CO	42
Middle enclosure for wall mounting	P_V	CO	40
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance			Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures			Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat			Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects			Lower part: 960 °C / cover: 850 °C; meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation			Not relevant to indoor installations.
10.2.5 Lifting			10 kg per enclosure with support frame and lifting aid met; assembled and secured as per the latest applicable instruction leaflet.
10.2.6 Mechanical impact			IK10
10.2.7 Inscriptions			Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES			IP65
10.4 Clearances and creepage distances			Is the panel builder's responsibility.
10.5 Protection against electric shock			Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components			Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections			Is the panel builder's responsibility.
10.8 Connections for external conductors			Is the panel builder's responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strength			U_i = 1000 V AC
10.9.3 Impulse withstand voltage			8 kV
10.9.4 Testing of enclosures made of insulating material			Meets the product standard's requirements.
10.10 Temperature rise			The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating			Is the panel builder's responsibility.
10.12 Electromagnetic compatibility			Is the panel builder's responsibility.
10.13 Mechanical function			Meets the product standard's requirements.

Product Standards			UL 508A; CSA-C22.2 No.94; IEC/EN60529; CE marking
UL File No.			E54120, E337418
UL Category Control No.			NITW
CSA File No.			27130
CSA Class No.			3211-07
North America Certification			UL listed, CSA certified
Specially designed for North America			Yes
Suitable for			Industrial Control Panels
Current Limiting Circuit-Breaker			No
Degree of Protection			IEC: IP65; UL/CSA Types 1, 12, 13, 4X, indoor only

${#text_magnify#}$

	Manufacturer's Declaration CI-RoHS
	Declaration of conformity

	Insulated enclosure, smooth sides, HxWxD=250x375x175mm, NA type
	Part no.	CI43X-150-NA
	Catalog No.	002232

	EL-Nummer (Norway)	2502040